Anhui AACC Welding Consumables Supplier

Products range

  • E6013
  • It is suitable for welding structures made of low carbon steel, performs very well in welding thin and small size steel plates and also has very good performance in the situation that requires nice and clean bead appearance.
  •  
  • J506Fe
  • E7018
  • It is applied in welding structures made of carbon steel and low-alloy steel such as 16Mn.
  • J506Fe18
  • E7028
  • It is applied in flat and flat fillet welding in structures made of carbon steel and low alloy steel such as 16Mn, 09Mn2Si and A, B, D, E steels used in shipbuilding.
  • E7015
  • It is applied in welding medium-carbon steel and low-alloy structures such as 16Mn, 09Mn2Si, 09Mn2V and the steels used in shipbuilding such as A, B, D, E. It is also used in thick steel plates and the carbon steel structures that are difficult to weld.
E7016  / E6010 / E6011 

  • A002
  • E308L-16
  • E308L-16
  • Used for welding ultra-low-carbon Cr19Ni10 stainless steel structures, and also used for 06Cr18Ni11Ti corrosion-resistant stainless steel structures whose working temperature is lower than 300°C. Mainly used in the manufacture of synthetic fiber, chemical fertilizer, oil and other equipments
  • A022
  • E316L-16
  • E316L-16
  • Used for welding of synthetic fiber and other equipments and the same type of stainless steel structure, In addition, it is applied to weld the steel that cannot be processed with thermal treatment, such as Chromium stainless steel, clad steel, dissimilar steel, etc.
  • A102
  • E308-16
  • E308-16
  • Used for welding the corrosion resistant stainless steel structure, such as 06Cr19Ni10 and 06Cr18Ni11Ti and their working temperature should be below 300℃
  • A132
  • E347-16
  • E347-16
  • Used for welding important corrosion resistant stainless steel this contains stable Ti such as 06Cr18Ni11Ti.
  • A202
  • E316-16
  • E316-16
  • It is used in welding the 06Cr17Ni12Mo2 stainless steel that is applied in the media of organic acid and inorganic acid.
  • A302
  • E309-16
  • E309-16
  • It is used in similar type stainless steel, dissimilar stainless steel and high chromium steel and high manganese steel.



 
  • E491T8-Ni1-J
  • E71T8-Ni1-J
  • It is applied in the situation where high ductility and element nickel are required. It especially fits in welding oil and gas pipelines coded from API X52 to X70, which have high requirement of low-temperature toughness. It is also applicable in fully and semi –automatic welding of ordinary steels, weathering-resistant steels and high-strength steels such as gas and oil pipeline, offshore platform, storage tank and etc.
  •  
  • E501T-1
  • E71T-1C
  • Used for welding structures made of carbon steel and low-alloy structural steel with tensile strength higher than or equal to 490MPa. Most widely used for welding some key structures like shipbuilding, mechanical manufacture, pressure vessels, boilers, petroleum machinery, chemical machinery, hoisting machinery etc.
  •  
  • E308LT1-1
  • E308LT1-1
  • Used for welding corrosion-resistant 06Cr19Ni10, 07Cr19Ni11Ti stainless steel structures and the working temperature should be below 300℃. It used for welding 301,302,304,301L, 308,308L and other stainless steel materials.
  •  
  • E309LT1-1
  • E309LT1-1
  • JQ309L can be used for welding petrochemical and other manufacturing equipment, chemical composition of the same type of stainless steel structure and composite steel, steel and other components. Can also be used for wall welding of nuclear reactor, pressure vessel, transition layer surfacing and internals of oil refining equipmentJQ309L can be used for welding petrochemical and other manufacturing equipment, chemical composition of the same type of stainless steel structure and composite steel, steel and other components. Can also be used for wall welding of nuclear reactor, pressure vessel, transition layer surfacing and internals of oil refining equipment.
  •  
  • E316LT1-1
  • E316LT1-1
  • Used for welding ultra low carbon stainless steel such as 022Cr17Ni12Mo12, the stainless steel that cannot take the heat treatment after welding and welding Composite steel and dissimilar steel.


  • ER316L
  • It is widely used in petrochemical, chemical fertilizer equipment such as 022Cr17Ni12Mo2 (SUS 316L) and other materials of welding.
  •  
  • ER308L
  • It is widely used in petrochemical, pressure vessel, food processing machinery, medical equipment, chemical fertilizer equipment, textile machinery, nuclear reactor such as 022Cr19Ni10 (SUS 304L) and other materials of welding.
  • Used for welding atmospheric corrosion-resistant steel structures with corresponding strength, such as locomotive vehicles, offshore engineering, bridges, etc.
  •  
  • ER316
  • It is widely used in petrochemical, chemical fertilizer equipment such as 06Cr17Ni12Mo2 (SUS 316L) and other materials of welding.
  • ER308
  • Used for 12Cr18Ni9 (SUS 302), 06Cr19Ni10 (SUS 304) austenitic kind of stainless steel and welding similar raw materials, used for welding thin plates as well.
  •  
  • ER49-1
  • Used for welding low-carbon steel and some low-alloy steel structures.
  •  
  • ER50-3
  • ER70S-3
  • 1. Used for welding low-carbon steel & thin plates. 2. Used for welding low-carbon steel parts with thorough surface treatment.
  •  
  • ER50-4
  • ER70S-4
  • Used for welding low-carbon steel and some low-alloy steel structures.
  •  
  • ER50-6
  • ER70S-6
  • 1. Used for welding all kinds of 500MPa structural steel parts. 2. Used for welding all kinds of 500MPa plates and pipes.
  •  
  • ER50-G
  • ER70S-G
  • 1. Used for welding all kinds of 500MPa structural steel parts, thick plates and thick pipelines. 2. Used for high speed welding on 500MPa base metals.


  • H08MnA
  • EM12
  • Using with sintered flux JQ.SJ101, it can be applied both for high-speed welding steel plate of tensile strength 420N/mm2 and filling welding
  • H10Mn2
  • EH14
  • using with sintered flux JQ.SJ101, it can be applied both for high-speed welding steel plate of tensile strength 490N/mm2 and filling welding。Mechanical properties of deposited metal is very stable.
  • H10MnSi
  • EM13K
  • using with sintered flux JQ.SJ101, it can be applied both for high-speed welding steel plate of tensile strength 420N/mm2 and filling welding. It is widely used for welding boiler, pressure vessel, bridge, ship etc.


Welding flux